Hoppa till innehåll

Sökresultat Sökningen pågår Sökresultaten dyker upp här efterhand. Du kan fortsätta skriva om du vill begränsa sökningen.
Söker efter användare
Avancerad sökning
Söker efter gallerier
Se alla gallerier
Sök forumtrådar
Avancerad sökning
Stäng

DVBlink - Oscam - Acamd - funkar i några timmar sedan "permission deni

Startad av andcar , jun 17 2011 20:00
1 svar till detta ämne
  • Vänligen logga in för att kunna svara

#1

Postad 17 juni 2011 - 20:00

andcar
  • andcar

    • Wannabe

  • 24 inlägg
  • 0
Använder OScam, ACamd, DVBlink för att se krypterade kanaler i MediaCenter.
Kortläsaren är den orange från AD-teknik (USB Phoenix).

Allt fungerar utmärkt i några timmar, sedan plötsligt verkar den tappa kontakten med kortet, eller den virtuella serieporten slutar tillåta kommunikation.

Loggen från Oscam:
Först fungerar allt som det ska:
2011/06/17 18&#58;00&#58;50   F781C0 s >> OSCam <<  cardserver started, version 1.00-unstable_svn, build #5387 &#40;i386-pc-cygwin&#41;
2011/06/17 18&#58;00&#58;50   F781C0 s version=1.00-unstable_svn, build #5387, system=i386-pc-cygwin, nice=1
2011/06/17 18&#58;00&#58;50   F781C0 s client max. idle=120 sec, debug level=0
2011/06/17 18&#58;00&#58;50   F781C0 s max. logsize=1000 Kb, loghistorysize=8192 bytes
2011/06/17 18&#58;00&#58;50   F781C0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/06/17 18&#58;00&#58;50   F781C0 s services reloaded&#58; 0 services freed, 1 services loaded
2011/06/17 18&#58;00&#58;50   F781C0 s userdb reloaded&#58; 2 accounts loaded, 0 expired, 0 disabled
2011/06/17 18&#58;00&#58;50   F781C0 s signal handling initialized &#40;type=sysv&#41;
2011/06/17 18&#58;00&#58;50   F781C0 s can&#39;t open file &#34;./oscam.srvid&#34; &#40;err=2 No such file or directory&#41;, no service-id&#39;s loaded
2011/06/17 18&#58;00&#58;50   F781C0 s can&#39;t open file &#34;./oscam.tiers&#34; &#40;err=2 No such file or directory&#41;, no tier-id&#39;s loaded
2011/06/17 18&#58;00&#58;50   F781C0 s 36 provid&#39;s loaded
2011/06/17 18&#58;00&#58;50   F781C0 s can&#39;t open file &#34;./oscam.ird&#34; &#40;errno=2 No such file or directory&#41; irdeto guessing not loaded
2011/06/17 18&#58;00&#58;50   F781C0 s monitor&#58; initialized &#40;fd=7, port=988&#41;
2011/06/17 18&#58;00&#58;50   F781C0 s camd33&#58; disabled
2011/06/17 18&#58;00&#58;50   F781C0 s camd35&#58; disabled
2011/06/17 18&#58;00&#58;50   F781C0 s cs378x&#58; disabled
2011/06/17 18&#58;00&#58;50   F781C0 s newcamd&#58; initialized &#40;fd=8, port=15000, crypted&#41;
2011/06/17 18&#58;00&#58;50   F781C0 s CAID&#58; 0500
2011/06/17 18&#58;00&#58;50   F781C0 s provid #0&#58; FFF510
2011/06/17 18&#58;00&#58;50   F781C0 s provid #1&#58; 020500
2011/06/17 18&#58;00&#58;50   F781C0 s provid #2&#58; 023200
2011/06/17 18&#58;00&#58;50   F781C0 s provid #3&#58; 023210
2011/06/17 18&#58;00&#58;50   F781C0 s provid #4&#58; 023220
2011/06/17 18&#58;00&#58;50   F781C0 s provid #5&#58; 023230
2011/06/17 18&#58;00&#58;50   F781C0 s provid #6&#58; 023240
2011/06/17 18&#58;00&#58;50   F781C0 s provid #7&#58; 040D00
2011/06/17 18&#58;00&#58;50   F781C0 s radegast&#58; disabled
2011/06/17 18&#58;00&#58;50   F781C0 s http thread started
2011/06/17 18&#58;00&#58;50   F781C0 s creating thread for device /dev/com2
2011/06/17 18&#58;00&#58;50   FE10E8 h HTTP Server listening on port 8989
2011/06/17 18&#58;00&#58;50   FE42C0 r reader thread started &#40;thread=  FE42C0, label=phoenix, device=/dev/com2, detect=cd, mhz=357, cardmhz=357&#41;
2011/06/17 18&#58;00&#58;50   F781C0 s loadbalancer&#58; can&#39;t read from file /Users/Anders/AppData/Local/Temp/_oscam/stat
2011/06/17 18&#58;00&#58;50   F781C0 s waiting for local card init
2011/06/17 18&#58;00&#58;53   FE42C0 r phoenix card detected
2011/06/17 18&#58;00&#58;57   FE42C0 r ATR&#58; 3F 77 18 00 00 C2 7A 44 02 68 90 00 
2011/06/17 18&#58;00&#58;58   FE42C0 r ERROR in IO_Serial_WaitToRead&#58; &#40;errno=22 Invalid argument&#41;
2011/06/17 18&#58;00&#58;58   FE42C0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/06/17 18&#58;00&#58;59   FE42C0 r card system not supported
2011/06/17 18&#58;00&#58;59   FE42C0 r Normal mode failed, reverting to Deprecated Mode
2011/06/17 18&#58;01&#58;03   FE42C0 r ATR&#58; 3F 77 18 00 00 C2 7A 44 02 68 90 00 
2011/06/17 18&#58;01&#58;03   FE42C0 r Warning&#58; D=0 is invalid, forcing D=1
2011/06/17 18&#58;01&#58;04   FE42C0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/06/17 18&#58;01&#58;05   FE42C0 r &#91;viaccess-reader&#93; using ecm #607 for long viaccess ecm
2011/06/17 18&#58;01&#58;05   FE42C0 r type&#58; Viaccess &#40;standard atr&#41;, caid&#58; 0500, serial&#58; 3185169872
2011/06/17 18&#58;01&#58;08   FE42C0 r providers&#58; 5 &#40;FFF510,040D00,040D10,040D20,040D30&#41;
2011/06/17 18&#58;01&#58;08   FE42C0 r &#91;viaccess-reader&#93; ready for requests
2011/06/17 18&#58;01&#58;08   FE42C0 r found cardsystem viaccess
2011/06/17 18&#58;01&#58;08   FE42C0 r &#91;viaccess-reader&#93; card detected
2011/06/17 18&#58;01&#58;08   FE42C0 r &#91;viaccess-reader&#93; serial&#58; <borttaget>
2011/06/17 18&#58;01&#58;09   FE42C0 r provider&#58; 1, id&#58; FFF510, name&#58; BOXER, sa&#58; BDD9D5D0, geo&#58; empty
2011/06/17 18&#58;01&#58;10   FE42C0 r provider&#58; 2, id&#58; 040D00, name&#58; BOXER1, sa&#58; BDD9D5D0, geo&#58; FF FF FF FF 
2011/06/17 18&#58;01&#58;10   FE42C0 r class&#58; 14, expiry date&#58; 2011/06/01 - 2011/06/30
2011/06/17 18&#58;01&#58;10   FE42C0 r class&#58; 14, expiry date&#58; 2011/05/01 - 2011/05/31
2011/06/17 18&#58;01&#58;10   FE42C0 r class&#58; 01, expiry date&#58; 2011/04/01 - 2011/04/30
2011/06/17 18&#58;01&#58;10   FE42C0 r class&#58; 14, expiry date&#58; 2011/04/01 - 2011/04/30
2011/06/17 18&#58;01&#58;11   FE42C0 r class&#58; 14, expiry date&#58; 2011/03/01 - 2011/03/31
2011/06/17 18&#58;01&#58;11   FE42C0 r class&#58; 14, expiry date&#58; 2011/02/01 - 2011/02/28
2011/06/17 18&#58;01&#58;12   FE42C0 r provider&#58; 3, id&#58; 040D10, name&#58; BOXER2, sa&#58; BDD9D5D0, geo&#58; FF FF FF FF 
2011/06/17 18&#58;01&#58;13   FE42C0 r provider&#58; 4, id&#58; 040D20, name&#58; BOXER3, sa&#58; BDD9D5D0, geo&#58; FF FF FF FF 
2011/06/17 18&#58;01&#58;14   FE42C0 r provider&#58; 5, id&#58; 040D30, name&#58; BOXER4, sa&#58; BDD9D5D0, geo&#58; FF FF FF FF 
2011/06/17 18&#58;01&#58;14   F781C0 s init for all local cards done
2011/06/17 18&#58;01&#58;14   F781C0 s anti cascading disabled
2011/06/17 18&#58;01&#58;57   FF0758 c client connected to 15000 port
2011/06/17 18&#58;01&#58;58   FF0758 c encrypted newcamd&#58;15000-client 127.0.0.1 granted &#40;user12, au=on &#40;1 reader&#41;&#41;
2011/06/17 18&#58;01&#58;58   FF0758 c user user12 authenticated successfully &#40;ACamd&#41;
2011/06/17 18&#58;01&#58;58   FF0758 c AU enabled for user user12 on reader phoenix
2011/06/17 18&#58;01&#58;58   FF0758 c user12 &#40;0500&040D00/1C20/49&#58;4C2B&#41;&#58; found &#40;682 ms&#41; by phoenix &#40;of 1 avail 1&#41;
2011/06/17 18&#58;01&#58;59   FF0758 c user12 &#40;0500&040D00/1C20/49&#58;4C2B&#41;&#58; cache1 &#40;0 ms&#41; by phoenix &#40;of 1 avail 1&#41;
2011/06/17 18&#58;02&#58;05   FF0758 c user12 &#40;0500&040D00/1C20/49&#58;4D2B&#41;&#58; found &#40;580 ms&#41; by phoenix &#40;of 1 avail 1&#41;


Efter två timmar slutar det plötsligt fungera
2011/06/17 20&#58;09&#58;07  10B6150 c user11 &#40;0500&040D00/1C20/49&#58;4D2B&#41;&#58; found &#40;570 ms&#41; by phoenix &#40;of 1 avail 1&#41;
2011/06/17 20&#58;09&#58;17  10B6150 c user11 &#40;0500&040D00/1C20/49&#58;4C2B&#41;&#58; found &#40;958 ms&#41; by phoenix &#40;of 1 avail 1&#41;
2011/06/17 20&#58;09&#58;25  1080C48 c user12 &#40;0500&040D00/0442/3A&#58;953F&#41;&#58; found &#40;520 ms&#41; by phoenix &#40;of 1 avail 1&#41;
2011/06/17 20&#58;09&#58;27  10B6150 c user11 &#40;0500&040D00/1C20/49&#58;4D2B&#41;&#58; found &#40;570 ms&#41; by phoenix &#40;of 1 avail 1&#41;
2011/06/17 20&#58;09&#58;39   FE42C0 r ERROR in IO_Serial_Write u=-1 to_send=5 &#40;errno=13 Permission denied&#41;
2011/06/17 20&#58;09&#58;39   FE42C0 r ERROR in IO_Serial_WaitToRead&#58; &#40;errno=13 Permission denied&#41;
2011/06/17 20&#58;09&#58;39   FE42C0 r ERROR in IO_Serial_Write u=-1 to_send=64 &#40;errno=13 Permission denied&#41;
2011/06/17 20&#58;09&#58;39   FE42C0 r ERROR in IO_Serial_WaitToRead&#58; &#40;errno=13 Permission denied&#41;
2011/06/17 20&#58;09&#58;39   FE42C0 r Error processing ecm for caid 0500, srvid 1C20 &#40;servicename&#58; 0500&#58;1C20 unknown&#41; on reader phoenix.
2011/06/17 20&#58;09&#58;39  10B6150 c user11 &#40;0500&040D00/1C20/49&#58;4C2B&#41;&#58; not found &#40;2410 ms&#41; by phoenix &#40;of 1 avail 1&#41;
2011/06/17 20&#58;09&#58;39   FE42C0 r ERROR Phoenix_GetStatus&#58; ioctl error in card detection for phoenix
2011/06/17 20&#58;09&#58;39   FE42C0 r card ejected
2011/06/17 20&#58;09&#58;40   FE42C0 r ERROR Phoenix_GetStatus&#58; ioctl error in card detection for phoenix
2011/06/17 20&#58;09&#58;40   FE42C0 r ERROR Phoenix_GetStatus&#58; ioctl error in card detection for phoenix


Om jag startar om Oscam blir det följande
2011/06/17 20&#58;13&#58;55   B581C0 s >> OSCam <<  cardserver started, version 1.00-unstable_svn, build #5387 &#40;i386-pc-cygwin&#41;
2011/06/17 20&#58;13&#58;55   B581C0 s version=1.00-unstable_svn, build #5387, system=i386-pc-cygwin, nice=1
2011/06/17 20&#58;13&#58;55   B581C0 s client max. idle=120 sec, debug level=0
2011/06/17 20&#58;13&#58;55   B581C0 s max. logsize=1000 Kb, loghistorysize=8192 bytes
2011/06/17 20&#58;13&#58;55   B581C0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/06/17 20&#58;13&#58;55   B581C0 s services reloaded&#58; 0 services freed, 1 services loaded
2011/06/17 20&#58;13&#58;55   B581C0 s userdb reloaded&#58; 2 accounts loaded, 0 expired, 0 disabled
2011/06/17 20&#58;13&#58;55   B581C0 s signal handling initialized &#40;type=sysv&#41;
2011/06/17 20&#58;13&#58;55   B581C0 s can&#39;t open file &#34;./oscam.srvid&#34; &#40;err=2 No such file or directory&#41;, no service-id&#39;s loaded
2011/06/17 20&#58;13&#58;55   B581C0 s can&#39;t open file &#34;./oscam.tiers&#34; &#40;err=2 No such file or directory&#41;, no tier-id&#39;s loaded
2011/06/17 20&#58;13&#58;55   B581C0 s 36 provid&#39;s loaded
2011/06/17 20&#58;13&#58;55   B581C0 s can&#39;t open file &#34;./oscam.ird&#34; &#40;errno=2 No such file or directory&#41; irdeto guessing not loaded
2011/06/17 20&#58;13&#58;55   B581C0 s monitor&#58; initialized &#40;fd=7, port=988&#41;
2011/06/17 20&#58;13&#58;55   B581C0 s camd33&#58; disabled
2011/06/17 20&#58;13&#58;55   B581C0 s camd35&#58; disabled
2011/06/17 20&#58;13&#58;55   B581C0 s cs378x&#58; disabled
2011/06/17 20&#58;13&#58;55   B581C0 s newcamd&#58; initialized &#40;fd=8, port=15000, crypted&#41;
2011/06/17 20&#58;13&#58;55   B581C0 s CAID&#58; 0500
2011/06/17 20&#58;13&#58;55   B581C0 s provid #0&#58; FFF510
2011/06/17 20&#58;13&#58;55   B581C0 s provid #1&#58; 020500
2011/06/17 20&#58;13&#58;55   B581C0 s provid #2&#58; 023200
2011/06/17 20&#58;13&#58;55   B581C0 s provid #3&#58; 023210
2011/06/17 20&#58;13&#58;55   B581C0 s provid #4&#58; 023220
2011/06/17 20&#58;13&#58;55   B581C0 s provid #5&#58; 023230
2011/06/17 20&#58;13&#58;55   B581C0 s provid #6&#58; 023240
2011/06/17 20&#58;13&#58;55   B581C0 s provid #7&#58; 040D00
2011/06/17 20&#58;13&#58;55   B581C0 s radegast&#58; disabled
2011/06/17 20&#58;13&#58;55   B581C0 s http thread started
2011/06/17 20&#58;13&#58;55   B581C0 s creating thread for device /dev/com2
2011/06/17 20&#58;13&#58;55   BC10E8 h HTTP Server listening on port 8989
2011/06/17 20&#58;13&#58;55   BC42C0 r reader thread started &#40;thread=  BC42C0, label=phoenix, device=/dev/com2, detect=cd, mhz=357, cardmhz=357&#41;
2011/06/17 20&#58;13&#58;55   BC42C0 r ERROR opening device /dev/com2
2011/06/17 20&#58;13&#58;55   BC42C0 r Cannot open device&#58; /dev/com2
2011/06/17 20&#58;13&#58;55   B581C0 s loadbalancer&#58; can&#39;t read from file /Users/Anders/AppData/Local/Temp/_oscam/stat
2011/06/17 20&#58;13&#58;55   B581C0 s waiting for local card init


Några idéer?
Det händer alltid efter ett par timmar. Enda sättet att få det att fungera igen är att resetta kortläsaren med det medföljande programmet. Inte ens omstart av datorn löser problemet.

Redigerat av andcar, 17 juni 2011 - 20:04.

#2

Postad 18 juni 2011 - 07:19

Unregistered35020
  • Unregistered35020

    • Forumräv

  • 635 inlägg
  • 0
Sätt phoenixläsaren i en usb-hubb med extern strömmatning.
Tillbaka till Windows Media Center

1 användare läser detta ämne

0 medlemmar, 1 gäster, 0 anonyma medlemmar

  1.  
  2. Minhembio forum
  3. → Media & Mediauppspelning
  4. → HTPC
  5. → Windows Media Center
  6. Personuppgiftspolicy
Minhembio - Senaste nyheterna
    Populära produkter
    Senaste galleribilderna
    • Hemmabiotidningen nr.10 2024
      Elias
      2024-09-25 19:37:23
    • Tomme
      2024-09-12 21:31:54
    • Tomme
      2024-09-12 21:30:43
    • Elias
      2024-09-04 17:31:02
    • Elias
      2024-09-04 17:29:09
    • Fler  |  Vilka bilder visas här?
    Trendande produkter
    Prisjakt © 2000 - 2024 Prisjakt   Cookiepolicy.   Våra regler.   Personuppgiftspolicy.  Hantera cookie-inställningar.